External display issues on your Mac? Try these steps

Many people use external displays with their Mac, either to mirror their display to a larger screen or expand their screen area for additional productivity. As good as this sounds, sometimes problems can occur with an external display that will require attention to get fixed.

In this piece, we’ll go over various things that could go wrong with an external display, as well as some potential troubleshooting steps to fix the problem.

Problems with external displays connected to Mac

What could possibly go wrong with Mac’s external display?

External displays, whether you bought one of Apple’s rather pricey options or you went with a third-party brand like LG, Samsung, or Dell, are subject to potential issues.

Although Apple does its best to make things plug-and-play, other manufacturers tend to have very different standards, and this means you may have to troubleshoot issues or take extra steps to configure a display to work properly with your Mac.

Even if your display isn’t new, you may have nudged a configuration button by mistake, which could cause all kinds of issues with its performance. If it wasn’t you that tapped the button, and it happened while you weren’t even home because one of your kids was toying around, or someone else who used the computer changed the settings, then this makes it even more challenging to figure out what’s going on.

Among some of the things that can go wrong with an external display are:

  • Blank or black picture gets displayed
  • Blurry or wrongly-scaled picture is shown
  • Inaccuracies and issues with color occur

With a gist of some of the things that could have gone wrong, do any of these sound familiar to you? If so, follow along as we talk about some potential fixes to these issues.

No picture – screen is black or another color

Whenever your external display shows a black or other solid color, it typically means there’s a problem with the signal to the display, but not always. It can also mean that there is a power issue, that the brightness is too low, or something else. After you’ve first turned the external display on (because no one ever forgets to do that), here are some things you can check:

Is the display supported?

For many 4K and 5K displays, you need to be using a Mac with a graphics card powerful enough to push that many pixels. The general rule of thumb is that most modern Macs manufactured after 2013 will support such a high resolution (but not all of them). You can go to the Apple tech specs page, select your Mac, and see the displays it supports.

Is your brightness turned all the way down?

I’m guilty of this myself. One time while watching a movie in my living room, I used my MacBook Pro as a video source to my HDTV, and I turned the brightness all the way down on my MacBook Pro to direct all attention to the TV. I thought my MacBook Pro’s display was borked when I disconnected the cable because the display stayed black. Silly me, I just forgot to turn the brightness back up. This can happen with external displays too. So check your external display’s brightness level by pressing Control + F2 on your keyboard.

Check the power plug on the external display

Hey, things happen! If you live where earthquakes are common, or you have rambunctious kids running around all the time, plugs are destined to work their way out of their sockets. Check to make sure that the external displays plug hasn’t come loose or that it’s plugged in at all.

Attach your Mac notebook’s power adapter

Some Apple notebooks don’t have enough juice to push the extra pixels of an external display. One of the things Apple recommends you try if you are using an Apple notebook, such as a MacBook, MacBook Air, or MacBook Pro, is to connect the power adapter to give it additional power.

Re-seat your video connections

Eliminate the possibility of a loose display connection by unplugging your display cables and plugging them back in properly. A loose connection will keep a proper electrical connection from occurring and can cause issues with your external display.

Are you using the right port?

This doesn’t apply to most Macs, but the late 2013 Mac Pro can be relatively picky. Make sure your display(s) are plugged into the correct port(s).

Avoid video adapter chains

Apple notes that chaining two incompatible video adapters together to make your Mac compatible with one or multiple external displays can actually cause issues; as an example, you cannot connect a Mini DisplayPort to DVI adapter to a DVI to HDMI adapter and expect a picture, as it simply won’t work. If possible, remove one of the adapters and avoid chaining them together.

Does the display work with other connections?

Try using another computer or another video source and see if the display works with that video connection. If it doesn’t, then the problem could be related to the display itself and not your Mac.

Is your video cable bad?

Those cheap $0.99 HDMI eBay specials are great on the wallet, but they tend to be rather short on life. Try using a known good video cable and see if the problem persists. Often, the video cable connecting the external display to your Mac just needs to be replaced.

External screen resolution doesn’t look how it should

Problems with display resolution will cause issues with your picture. With resolution issues, your picture may look blurry or scaled incorrectly.

Typically when you plug an external display into your Mac for mirroring, your Mac will automatically adjust its own display resolution to fit the external display. Sometimes, things don’t go so smoothly. Not all resolutions translate well to others, and this will cause scaling issues that make some things look elongated or too tall.

Adjust your resolution manually

It is possible for you to manually adjust your display resolution, and it can be done from the System Preferences on your Mac. From your menu bar, go to  > System Preferences > Displays and play around with the resolution settings until something looks comfortable for your eyes.

Changing external display resolution on Mac

Choose the default resolution

If you’re using a scaled resolution already, this may actually be the reason your picture looks weird, to begin with. Try setting your display to use the default resolution for the display from the same preferences pane discussed above.

Related: How to manage settings for external displays on Mac

Reset your NVRAM and SMC

Apple also suggests resetting your NVRAM and SMC if you experience resolution issues with your external display. Resolution settings are just one of the types of information that are stored in your NVRAM, so resetting your NVRAM may help set things how they should be. Your Mac’s SMC handles display management and display ports on your Mac, and resetting your SMC may solve resolution issues.

Change resolution settings in Safe Mode

Sometimes, you may find yourself unable to change external display settings on a regular boot-up. If this ever happens to you, Apple suggests booting your Mac into Safe Mode to see if the settings can be reset to default.

Check for software updates for your apps

Sometimes, specific apps may look blurry. If you’re using a Mac with a Retina display, you need to make sure you have the latest software installed. If just one app looks blurry, check the Mac App Store or developer’s website for any new versions of the app that might be Retina display-compatible.

Check for new drivers for your display

If every app on your display looks blurry, the display itself may need a driver update. Check the Mac App Store’s Updates tab or the manufacturer’s website for the latest driver software. Sometimes, an updated version of macOS may include pre-installed drivers, so always make sure macOS is up to date.

Problems with colors on your external display

Sometimes your display problems aren’t related to being unusable or to scaling problems, but rather to color. Maybe you have a color scheme that just doesn’t look right, an area of pixels on your screen doesn’t look right, or your display is out of calibration. Whatever the case, here are some steps you can take to correct color issues with your Mac’s external display:

Play with the display’s color profile

By visiting  > System Preferences > Display in your Mac’s menu bar, you can visit the Colors section and choose a color profile that looks the best to you. Sometimes, different external displays will look better with different non-factory color profiles. Play around a bit with these settings until you see something you like.

Display Color Profile in System Preferences on Mac

Calibrate your display’s color

If none of the presets in the list look good to you, try clicking on the Calibrate button from the Color tab in the Display settings of your external display. This will allow you to calibrate your display’s color and give it your own custom color settings.

Find the contrast button

Lots of third-party external displays not made by Apple have custom contrast buttons on them. You can typically press them on the monitor itself to adjust the contrast and make colors easier to distinguish between.

Find the color button

Like contrast buttons, some third-party external displays not made by Apple also have RGB buttons, which let you manually configure the Red, Green, and Blue levels for the display. If the display looks too orange for you, then give it some more green and blue. If it looks too blue for you, give it some more orange and green.

Adjust your brightness

The brighter your display is, the richer the colors are going to be because more light means more visibility. Your eyes use light to distinguish color. Try adjusting your display’s brightness either with the Control + F2 keyboard shortcut, or try finding a brightness button on the monitor itself.

Change display modes

Apple notes that some third-party displays have both a “monitor mode” and “television mode.” Monitor mode is going to offer the richest colors for a computer experience, and if you’re using your external display as a monitor, well, you should probably set it to monitor mode. Not all displays have this feature, but you should consult your display’s manufacturer or instructions booklet to find out more.

Do you have dead, bright, or weird pixels?

Apple refers to dead or bright pixels in a display as pixel anomalies. This can happen when individual pixels in your display malfunction and continue to emit colors incorrectly or don’t emit colors at all. It can also happen when a display gets foreign material trapped between the glass and pixel. If Apple made the display, they would be able to fix it at an Apple Retail Store or Apple Authorized Service Provider. If it’s a third-party display, you’ll have to contact the manufacturer.

Apple Display Pixel Anomaly

Mac’s external display issues fixed

These are some of the most common issues that can occur with using an external display on your Mac. Hopefully, after trying the steps listed here, you’re able to use your external display as you once thought you’d be able to.

If you found this tutorial helpful, we’d greatly appreciate you taking the time to explain what was wrong in the comments!

Other Mac troubleshooting guides: